Bigger and better! The NugSmasher XP is boasts a larger 4” x 6” dual heated plates and it also features a hydraulic pressure gauge along with the capability of putting down 12 tons of pressure. Through its bigger plates and 12-tons of pressure, pressing up to 14g should be a piece of cake for this hulk of a machine.
|Rosin Press Technology Type||Manual|
|Plate Size||6" x 4"|
|Plate Material Type||Aluminum|
|Max. Pressure||12 Ton|
|Suggested Press Time||3-10 minutes depending on the material you're pressing|
|Adjustable Tilt Position||No|
All sales are final. Limited Lifetime Warranty. This warranty does not cover operator abuse or error.
Which Material Should I Use?
Yields range significantly and depends largely on the quality of the materials used.
* Adequate application of pressure is important to achieve optimal yields and these figures are based on averages tests. Results may vary and depend heavily on your material as well as the operator.
Which Micron Bag To Use?
Depending on your material, the proper micron bags are suggested but results will always vary.
For kief, dry sift, hash, and bubble hash, use a 36 micron or 72 micron bag.
72 micron rosin bags will offer higher yields compared to 36 micron rosin bags, but the 36 micron bags will provide the highest quality product.
For flower, trim, and shake, use a 115 micron or 90 micron bag.
You will get the highest yield from a 115 micron rosin bag compared with a 90 micron rosin bag, but the 90 micron bags will give you more filtration and slightly higher quality product.
36 micron - Most filtration available, highest quality output rosin for use with small and finer material
72 micron - High level of filtration, increased yields over 36 micron when pressing smaller and finer material
90 micron - Higher level of filtration for use with flower, trim, and shake rosin pressing
115 micron - Ideal level of filtration and high yielding for use with flower, trim, and shake rosin pressing
What Temperature Is Ideal?
How Much Pressure Should I Use?
There is no magic number for how much you need to press but most people use the formula of press pounds/plate surface area.
A 10-ton press = 20,000 lbs. If you have a 3"x5" plate = 15 square inch.
Hence, 20,000/15 = 1,333 PSI
Free shipping is only within the Lower 48 states and does not apply to certain products. Trimleaf reserves the right to change shipping prices and is subject to change without prior notice.
Immediately after placing an order online, you will receive an email confirming the details of your order.
Should the item purchased be unavailable, not in stock or have a longer than usual lead time, a member of our team will reach out via phone or e-mail to find a probable solution.
Order Shipment and Tracking
A tracking number will be emailed as soon as your order has been fulfilled and dispatched to the appropriate carrier.
Delivery updates and any delays will be communicated via email but you can also track your order with the tracking number at http://track.trimleaf.com/
If you did not receive tracking information from us within a reasonable amount of time from the date of your order, feel free to follow up with us by Contacting Us
Please inspect the packaging of your item(s) upon arrival and make note of it when signing for delivery. If your item(s) arrived damaged, please send photos to email@example.com where we will review and file a claim for it.
Cancellations & Refunds:
Order cancellations must be received within 24 hours of placing an order. If your order has shipped, you (the buyer) will also be responsible for the return shipping charges.
Trimleaf reserves the right to cancel and refund any orders deemed fraudulent without prior notice.
Be the first to ask a question about this.