EZTrim EZ PRESS PRO Hydraulic Rosin Tech Heat Press

Lowest Price on the Web:
$3,999.00 USD
 We Beat Any Price!*
 Secure Checkout
 Free Shipping Over $50*
 Discount on Multiple Units

EZTrim Authorized DealerAuthorized Dealer


You’re guaranteed the lowest prices. If you find a price lower than ours, we'll beat it! Learn more.

4 Great Reasons To Buy From Us:

  • Image of Image of Image of
  • Image of Image of Image of
  • Image of Image of Image of
  • Image of Image of Image of

EZTrim EZ PRESS PRO Hydraulic Rosin Tech Heat Press

The EZTrim EZ PRESS PRO Rosin Heat Press is the world’s best rosin press utilizing heat and pressure for extraction, enabling up to 60% yields.

Press your flowers or trim. No need for butane, co2, purging or heavy equipment that is dangerous to use.


  • Can get up to 60% yields
  • Can press kief, hash, buds, or trim into rosin
  • Press up to 1oz of material at a time
  • Separately monitored and controlled heating plates
  • 12 tons of pressure
  • 3” x 12” Aluminum heating plates
  • Manually operated 12-ton jack
  • Durable frame
  • Assembled Dimensions: L 26" W 19.5" H 48.5"
  • 100 lbs

What yields can I expect?


  1. Power on the unit
  2. Set the temperature to 93.3-132 degrees Celsius 200-270 degrees Fahrenheit for both plates (temp is preset at factory to 104.4 degrees C or 220 degrees F)
  3. Fill the micron tubes with 1 oz. of product
  4. Distribute the product evenly through the tube
  5. Fold over 2” of the tube at the open end
  6. Place the tube between 2 sheets of parchment paper
  7. Place the tube and parchment paper centered over the heat plate
  8. Release piston until raised to its highest point and tighten release screw
  9. With full top/bottom strokes pump the jack 21 – 23 times. Do not exceed 23 full pumps on the jack as it can damage the frame
  10. Hold in the pressed position for 30sec. to 1 minute
  11. Release the heat plate until the piston rises to its highest point and remove the parchment paper and tubes
  12. Empty the micron tubes and repeat steps 3 – 11


Can I press flower, hash or kief?

Yes, we have found if you are planning on pressing the flowers, it is best to crumble the flower up to a shake like consistency. Pressing the flowers will give you the best quality but not necessarily the best yields. We recommend that you kief your product before pressing. 

What is the best temperature for pressing?

Yields will vary based on the strain, quality and type of product you are pressing: Pressing straight trim will give you a mediocre yield and quality. Kiefing or hashing your product will give you high yields and better quality. Pressing the flowers will give you the very best quality but the least amount of yield (Crumble up the dried flowers and remove large stems before pressing).

What is the best temperature for pressing?

We recommend setting the temperature between 200F – 270F or 93.3C – 132.2C. The unit comes preprogrammed at 220F or 104.4C. The higher the heat, the higher the yield and the poorer the quality. 220F or 104.4C is the optimal setting for the best quality and yields.

Does it burn the product?

No, as long as you follow our instructions for use. The EZ Press Pro’s heat plates are designed to be near the same size as the micron tubes, this allows the product to escape the heat.


EZTRIM offers a 1-year warranty. This warranty does not cover operator error or abuse.

Shipping and Returns


Free shipping is only within the Lower 48 states and does not apply to certain products. Trimleaf reserves the right to change shipping prices and is subject to change without prior notice.

Order Confirmation:

Immediately after placing an order online, you will receive an email confirming the details of your order. 

Should the item purchased be unavailable, not in stock or have a longer than usual lead time, a member of our team will reach out via phone or e-mail to find a probable solution.

Order Shipment and Tracking

A tracking number will be emailed as soon as your order has been fulfilled and dispatched to the appropriate carrier. 

Delivery updates and any delays will be communicated via email but you can also track your order with the tracking number at

If you did not receive tracking information from us within a reasonable amount of time from the date of your order, feel free to follow up with us by Contacting Us

Damaged Shipment:

Please inspect the packaging of your item(s) upon arrival and make note of it when signing for delivery.  If your item(s) arrived damaged, please send photos to where we will review and file a claim for it. 

Cancellations & Refunds:

Order cancellations must be received within 24 hours of placing an order.  If your order has shipped, you (the buyer) will also be responsible for the return shipping charges. 

Trimleaf reserves the right to cancel and refund any orders deemed fraudulent without prior notice.

Ask a Question


Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 1 review
garretts review

really good! not quite 1lb an hr even using kief. but overall happy with the purchase. it sure beats using butane and purging. however i do still think butane yields better.

Related Products

$7,999.00 USD
EZTRIM DeBudder Indoor Stem Remover Bucker
$8,999.00 USD
EZTRIM DeBudder Outdoor Stem Remover Bucker
$6,999.00 USD
EZTRIM DeBudder TableTop Stem Remover Bucker