Humboldt Filling Machines 84mm 1 1/4 Cone Filling Machine Starter Kit

• 84mm 1 1/4 Cone Size 
• Available in 55, 121 and 389 cone capacity 
• Up to 0.5g Material Capacity 
• Easy clean-up

• cartridge
• riser
• tamping tool
• vibration table
• stabilization mat
• extension cord

1. Set the vibration table on the stabilization mat.

2. Plug the vibration table into the switched extension cord.
3. Plug the extension cord into a power outlet.
4. Place the cartridge on the vibration table; set the riser aside for now.
5. Fill the holes of the cartridge with your cones.
6. Turn on the vibration table using the switch on the extension cord.
7. Fill the top of the cartridge with your material and the vibration action will shake your material into the cones.
8. Use the included tamping tool to pack your material during operation.  PLEASE NOTE: Firmly tamp your material early in the filling process to ensure a firm, crisp, tight pack right near the crutch.
9. Once your cones are nearly full (leave some space at the end to twist), turn the vibration table off.
10. Pick up the cartridge and place the riser on the vibration table, underneath the cartridge.
11. Set the cartridge down on top of the riser, and the cones will be pushed up so that they are accessible.

12. Remove each cone and twist the end to finish.

Our filling machines can be cleaned with hot water up to 130º F. We recommend using an isopropyl (rubbing alcohol) & salt mixture, commonly used to remove plant resin and residue.  Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.