Humboldt Filling Machines 300 Series Cone Filling Cartridge

• 300 Series 
• Up to 1 Gram Material Capacity per Cone 
• Up to 389 cones per session 
• Includes Riser and Tamping Tool 
• Compatible with the VB2 Vibration Table 
• Available in 70, 84, 98 Classic, 98 Slim, and 109mm King Cone Size 

• Filling Machine Cartridge
• Riser
• Tamping Tool

1. Place the cartridge on the vibration table (not included); ensure the detachable base is firmly installed.
   
2. Fill the holes of the cartridge with your cones.
3. Turn on the vibration table (not included).
4. Fill the top of the cartridge with your material.
5. Use the included tamping tool to pack your material during operation.  PLEASE NOTE: Firmly tamp your material early in the filling process to ensure a firm, crisp, tight pack right near the crutch.
6. Once your cones are nearly full (leave some space at the end to twist), turn the vibration table (not included) off.
7. Pick up the cartridge and remove the detachable base by releasing the red clamps.
8. Set the cartridge top down on a flat surface, and the cones will be pushed up so that they are accessible.

9. Remove each cone and twist the end to finish.

Our filling machines can be cleaned with hot water up to 130º F but will warp over time if used in a dishwasher.   We recommend using an isopropyl (rubbing alcohol) and salt mixture, commonly used to remove plant resin and residue.  Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.