The G8-240B is an indoor LED grow light that is specifically formulated for the flowering stage of the growth cycle.
This is the light to use if you are setting up a separate flowering station for your plants.
This LED will give coverage for 6 square feet of grow space.
Remember to veg with LED grow lights if you want to flower with LED grow lights. Changing the light source from T5 or HID to LEDs during the flowering phase is very stressful for the plants. START with LEDs, FINISH with LEDs.
Use your G8LED grow lights properly for optimum growth and maximum yield. The biggest mistakes people make with LEDs are not having enough light and not placing the light at the proper distance. If you do not provide enough light, your plants will not grow to their full potential. Similarly, incorrect light placement will also not allow plants to grow to their full potential. Placing a light too close will stunt growth, too far will cause stretching. Follow the recommended coverage areas listed on the Details Page of each light for optimal light penetration and coverage. Keep in mind that there are many variables to indoor growing with lighting being one of the most critical.
Distance to hang G8LED Grow Lights from the top of the plant canopy:
As your plants grow and reach for the light, raise the light to keep the distance between the plants and light fairly constant. If you want the plants to stretch, continue raising the light as the plants grow. The plants will reach for the light source and grow taller. Stop raising the light when you do not want more length or when flowering. For shorter, bushier plants decrease the distance. If you keep the distance fixed, the plants will find an equilibrium height and grow wider and denser. If the light is too close it may be too intense and stunt growth and create discoloring. Follow the recommended distances and adjust as necessary. The distance can be kept constant during flowering. The 90 Watt Red Flower Booster is added at the same level as the Veg/Flower lights when the light cycle is changed to 12-12.
G8LED grow lights allow the plants to photosynthesize and grow more efficiently than other light sources. If you do give nutrients to your plants, reduce the number of nutrients given by 30% when growing with LED grow lights.
G8LED grow lights give off only 10% of the heat that an HID bulb such as metal halide (MH) or high-pressure sodium (HPS). The lower heat output also means there will be less water evaporation and less need for watering. If growing in soil, water your plants on when the soil is dry (every 2-4 days) to avoid roots rotting.
G8LEDs have a lower heat output. It is easier to regulate grow room temperatures and the temperature immediately below the light.The ambient room temperature should be below 90 degrees Fahrenheit (ideally 82-85 degrees) and as low as 72 degrees when the lights are on. Temperatures will be lower during the off period when the lights are not in use.
Let the plants rest. Plants need dark time to rest so they can more effectively photosynthesize light energy to grow during the light hours. Minimize working on the plants during the off-cycle and avoid light intrusion into your grow room.
During the vegetative stage is when you will start to reap the benefits of your LED grow lights. During this period you will save on your electricity bills and get superior growing results if you properly follow the general tips listed in this section. In the vegetative stage, plants need less intense lighting than in the flowering stage.
Vegetative growth is maintained with 16 or more hours of light. You can even keep the plants under 24 hours of light and they will continue to grow in this stage. However, the recommended growth cycle is 18 hours of light during the vegetative growth stage. This light cycle will create an environment that mimics the photoperiod in the summer with long days. During the vegetative stage is when you will start to reap the benefits of your LED grow lights. During this period you will save on your electricity bills and get superior growing results. In the vegetative stage, plants need less intense lighting than in the flowering stage. It is during the vegetative growth stage that cloning, transplanting, pruning, and bending are all initiated.
Turn your LED grow light ON for 18 hours a day and then turn the light OFF and leave your plant in the dark for another 6 hours. Your plant will need four to six weeks of this cycle to be ready to start the flowering stage. Pre-flowers are the first indication that the plant is ready to move into the next stage of growth. The pre-flowers grow at branch internodes just behind the leaf spur in around the fourth week of vegetative growth, when the plant is six to eight weeks old. When you start seeing pre-flowers forming this means that the plants are ready to go into the flowering stage. You can continue to grow in the vegetative growth stage or switch to flowering at this point. The pre-flower looks like a regular female flower with white fuzzy pistils. The pre-flowering can take from one to two weeks. Wait to induce flowering until pre-flowers have appeared. Induce flowering by switching your light cycle to 12 hours of uninterrupted darkness and 12 hours of light.
With LED grow lights we mimic the seasons by changing the light cycle from 18 hours a day to 12 hours. Give your plants 12 hours of uninterrupted darkness and 12 hours of light to induce visible signs of flowering in two weeks or less. Adding more light to the plants also help give bigger flowers and yield. It is recommended to add an all-red 90 watt led grow light at this stage for more robust flowering.
Once you have induced flowering for one to two weeks and flowering starts, it can last eight weeks or longer. During flowering growth patterns and chemistry changes in the plants (i.e. indoor growing flowering stages). Stems elongate, leaves grow progressively fewer blades, and flower formation is rapid at first then slows. Phosphorus and potassium uptake increase to promote floral creation. Your nutrients should have less nitrogen and more potassium and phosphorus during flowering. Don't give nutrients too often as this can cause your plant to get nutrient burned. You should use about 30% fewer nutrients with LEDflowering grow lights as compared to MH/HPS systems. Do not over water, over nutrient and do not harvest too early.
LED grow lights are great for cloning plants. Proper usage of LED grows lights will multiply the number of plants you have in a methodical and environmentally friendly way. Cloning requires only 2-3 weeks in the vegetative state. Use an 18-20 hour ON cycle for your clone and spray it with water intermittently. As with the vegetative state, when your plants are seedlings the light should be at the recommended hanging distance. As the plants start to grow to adjust the light upwards a few inches at a time.
2-year warranty serviced directly by G8LED.
Normal processing time is still around 24 - 48 hours after an order is placed.
However, some products are under extended processing times up to 7 - 14 business days due to limited staff.
Please contact us if you have immediate questions regarding shipping or availability.
Thank you for understanding and your safety and health is our priority.
In very rare cases, international fees may sometimes be charged depending on the customer's credit card and issuer. Trimleaf is not liable for these charges. Please contact your bank prior to purchasing.
Immediately after placing an order online, you will receive an email confirming the details of your order.
Should the item purchased be unavailable, not in stock or have a longer than usual lead time, a member of our team will reach out via phone or e-mail to find a probable solution.
A tracking number will be emailed as soon as your order has been fulfilled and dispatched to the appropriate carrier.
Delivery updates and any delays will be communicated via email.
If you did not receive tracking information from us within a reasonable amount of time from the date of your order, feel free to follow up with us by Contacting Us
Trimleaf will be free from liabilities wherein the shipping carrier will be held responsible and an investigation will be opened by the carrier on a case by case basis.
Trimleaf will NOT bear any responsibility from loss or theft of packages in which the shipping carrier will be liable for fault.
Please inspect the packaging of your item(s) upon arrival and make note of it when signing for delivery. If your item(s) arrived damaged, please send photos to firstname.lastname@example.org where we will review and file a claim for it.
Order cancellations must be received within 24 hours of placing an order. If your order has shipped, you (the buyer) will be responsible for the return shipping charges.
Trimleaf reserves the right to cancel and refund any orders deemed fraudulent without prior notice.
Due to our growing range of products, we respect and tailor to the return policies of all our manufacturers. All products returned to us must be accompanied by a valid Return Merchandise Authorization (RMA) number issued by Trimleaf.
Any nutrient and supplemental brands are subject to final sale and are not eligible to be returned once opened and used. No exceptions.
Each return is subject to a minimum of 20% restocking fee where return shipping is the responsibility of the buyer.
You may request a RMA by Contacting Us.
All returned products must be 100% complete in original packaging and in resalable condition, with all packaging, manuals, warranty cards and other accessories and documentation included.
Please see the table below for reference:
Be the first to ask a question about this.