Simply Rosin 10 Ton Hydraulic Rosin Tech Press

Sorry, this product is no longer available.

Simply Rosin 10 Ton Hydraulic Rosin Tech Heat Press


The 10 Ton - 10,000PSI Hydraulic Rosin Press is a fully manual press that gives you control on your desired PSI levels - No Compressor Required!

No assembly required. Ready to use out of the box


  • Adjustable Heat Temperature: 0-400 Deg Fahrenheit
  • 2.375" x 4.75" Dual Heating Platens
  • Digital Temperature Controller For Top & Bottom Plates
  • Digital Count Down Timer W/ Alarm
  • 12"W x 10"D x 20"H
  • 110V

    Pressing Tips

    Which Material Should I Use?

    Yields range significantly and depends largely on the quality of the materials used.

    • Trim: 3% - 8%
    • Shake: 8% - 15%
    • Flower: 15% - 30%
    • Kief / Dry Sift: 30% - 60%+
    • Bubble Hash / Hash: 30% - 70%+

    Note: Adequate application of pressure is important to achieve optimal yields and these figures are based on averages tests. Results may vary and depend heavily on your material as well as the operator.

    Which Micron Bag To Use?

    Depending on your material, the proper micron bags are suggested but results will always vary.

    For kief, dry sift, hash, and bubble hash, use a 36 micron or 72 micron bag. 

    72 micron rosin bags will offer higher yields compared to 36 micron rosin bags, but the 36 micron bags will provide the highest quality product.

    For flower, trim, and shake, use a 115 micron or 90 micron bag. 

    You will get the highest yield from a 115 micron rosin bag compared with a 90 micron rosin bag, but the 90 micron bags will give you more filtration and slightly higher quality product. 

    36 micron - Most filtration available, highest quality output rosin for use with small and finer material

    72 micron - High level of filtration, increased yields over 36 micron when pressing smaller and finer material

    90 micron - Higher level of filtration for use with flower, trim, and shake rosin pressing

    115 micron - Ideal level of filtration and high yielding for use with flower, trim, and shake rosin pressing

    What Temperature Is Ideal?

    Lower temperatures (200°F- 300°F) = more flavor/terpenes, less yield, end material is more stable (shatter-like consistency)
    Higher temperatures (300°F- 350°F) = less flavor/terpenes, more yield, end material is less stable (sap-like consistency)

    How Much Pressure Should I Use?

    There is no magic number for how much you need to press but most people use the formula of press pounds/plate surface area.

    For example:

    A 10-ton press = 20,000 lbs. If you have a 3"x5" plate = 15 square inch.

    Hence, 20,000/15 = 1,333 PSI

    Note: These numbers serve as a guide only. Results will always vary depending on temperature and material as well the press you choose.

      Warranty Policy

      All sales are final

      1-year product warranty. Should anything go wrong with any of the machine components within the warranty period, replacement parts shall be sent to the customer.

      Shipping and Returns


      Free shipping is only within the Lower 48 states and does not apply to certain products. Trimleaf reserves the right to change shipping prices and is subject to change without prior notice.

      Order Confirmation:

      Immediately after placing an order online, you will receive an email confirming the details of your order. 

      Should the item purchased be unavailable, not in stock or have a longer than usual lead time, a member of our team will reach out via phone or e-mail to find a probable solution.

      Order Shipment and Tracking

      A tracking number will be emailed as soon as your order has been fulfilled and dispatched to the appropriate carrier. 

      Delivery updates and any delays will be communicated via email but you can also track your order with the tracking number at

      If you did not receive tracking information from us within a reasonable amount of time from the date of your order, feel free to follow up with us by Contacting Us

      Damaged Shipment:

      Please inspect the packaging of your item(s) upon arrival and make note of it when signing for delivery.  If your item(s) arrived damaged, please send photos to where we will review and file a claim for it. 

      Cancellations & Refunds:

      Order cancellations must be received within 24 hours of placing an order.  If your order has shipped, you (the buyer) will also be responsible for the return shipping charges. 

      Trimleaf reserves the right to cancel and refund any orders deemed fraudulent without prior notice.

      Ask a Question


      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Customer Reviews

      Based on 2 reviews
      Great,easy to use !

      No assembly required supper light and does a great job in seconds !

      Does the job

      It does what it's supposed to. Easy to use

      Related Products

      $4,599.00 USD - $4,299.00 USD
      Dulytek DE40K 20 Ton Industrial Hybrid Rosin Heat Press
      $650.00 USD - $559.00 USD
      Dulytek DHP7 7 Ton Hydraulic Rosin Heat Press
      $1,999.00 USD - $1,799.00 USD
      Dulytek Elite DE10K 5 Ton Hybrid Rosin Heat Press