Scale up your rosin production with the Pure Pressure Longs Peak rosin press.
Taking a cue from its predecessor, the Pikes Peak, the Longs Peak takes your automated production level to a whole new level, without sacrificing quality.
The Longs Peak also uses the trademark Pressware Technology, which lets you set the right amount of temperature and pressure in each press.
With two premium 6061 aluminum heat plates, the Longs Peak can press up to 35 grams of flowers, or 70 grams of Kief or Hash in one go with up to eight (8) tons of force. The heat plates can heat up to 300 degrees Fahrenheit, and even pre-heat without having to press.
The wrong amount of pressure produces terrible results. That’s why the Longs Peak gives you precision control over temperature and pressure, so you get the best results for each strain.
Once you have found your sweet spot, save it in 1 of the 29 presets slots so you can recall and get consistent results.
Can’t figure where to put it? The Longs Peak comes with two (2) sets of orientation legs, which lets you use the press either vertical or horizontal position.
All Longs Peak units are handmade*, so you can expect topnotch quality control in every machine.
The APC system enables unparalleled force control at the touch of a button with the PurePressure Pressware® touchscreen interface. As opposed to manual force adjustments using the toggle lever of the Dual Pressure Control system, rosin press users control all force adjustments with extreme precision.
A single operator can run up to 3 presses simultaneously, taking advantage of this system’s fully-automated nature. Users can create custom recipes or have the machine learn recipes on-the-fly. With full pressure control at the tip of your fingers, adjust operating pressure by as little as 1 psi at a time.
This system was engineered for those who demand high output and have uncompromising attention to detail in their rosin press extractions.
This trademark technology gives full control over the pressure and temperature in each press. Use the built-in touchscreen interface and proprietary software for total control and consistency.
Press up to 20 grams of flowers or 35 grams of Kief or Hash in one go, using its premium 6061 aluminum heat plates with independent heating for each plate.
Save and recall up to 29 temperature and pressure presets for your most used strains
With the two sets of orientation legs, you can position the Longs Peak in a vertical or horizontal position, giving you options on where to place it in your facility.
The Longs Peak is composed of powder-coated steel. It also uses oil-less pneumatic cylinders, reducing your maintenance costs. Firmware updates and diagnostic tools are available through the Pure Pressure software for Mac and PC.
*All Longs Peak units are made to order, and require two weeks lead time before shipping
Which Material Should I Use?
Yields range significantly and depend largely on the quality of the materials used.
Depending on your material, the proper micron bags are suggested but results will always vary.
For kief, dry sift, hash, and bubble hash, use a 36 micron or 72-micron bag.
72-micron rosin bags will offer higher yields compared to 36-micron rosin bags, but the 36-micron bags will provide the highest quality product.
For the flower, trim, and shake, use a 115 micron or 90-micron bag.
You will get the highest yield from a 115-micron rosin bag compared with a 90-micron rosin bag, but the 90-micron bags will give you more filtration and slightly higher quality product.
36 micron - Most filtration available, highest quality output rosin for use with kief, dry sift, hash, and bubble hash
72 micron - High level of filtration, increased yields over 36 microns when pressing kief, dry sift, hash, and bubble hash
90 micron - A higher level of filtration for use with flower, trim and shake rosin pressing
115 micron - Ideal level of filtration and high yielding for use with flower, trim and shake rosin pressing
How Much Pressure Should I Use?
There is no magic number for how much you need to press but most people use the formula of press pounds/plate surface area.
A 10-ton press = 20,000 lbs. If you have a 3"x5" plate = 15 square inch.
Hence, 20,000/15 = 1,333 PSI
PurePressure's rosin presses are built to last for many years with proper care. We want you to be satisfied with your equipment so if there are ever any concerns, please do not hesitate to contact us. PurePressure guarantees the following warranty coverage for the Pikes Peak V2 and Longs Peak rosin presses:
Pure Pressure does not accept returns or exchanges unless the item purchased is defective. If you receive a defective item, please contact us with details of the product and the defect.
⚠️ Due to COVID-19, some products are under extended processing times. Processing times can span anywhere from 2 - 14 business days, sometimes longer. Learn more
To get the best representation of a product's lead time, email us at firstname.lastname@example.org or call us at 619-535-1834
Free shipping on qualified items to the lower 48 states. Some that are not eligible are stated on their respective product information page. Learn more
Refunds & Returns
Cancellations are accepted within 24 hours of placing an order.
Returns are subject to each manufacturer's return policy. Please look into the return policy of the brand prior to ordering. Learn more
What is the difference between dual Pressure control an automated Pressure control?
That's a great question! The Automated Pressure Control automates the functionality of the press. Click here for an in depth video from Pure Pressure
What is the plate size?
The Pure Pressure Longs Peak has 10x3 inch plate sizes
At first I was a little nervous about spending so much money on a press. Come to find out this was the best place to get the Longs Peak. The customer service at Trimleaf took great care of me. The Longs Peaks was everything I needed. I would definitely but from Trimleaf again.